Play Video

Modular Composite Shelter System (MCSS)

A green and purple striped background

The construction employed in the Modular Composite Shelter System (MCSS) provides the flexibility to design, is relocatable, and constructs a nearly infinite number of variants, configurations, and capabilities from 42 to over 10,000 square feet. In addition to the base single pod MCSS, custom designs are available to meet your emerging requirements. Using lightweight, high-strength, low-cost, rigid composite panels, our customization is sure to meet your needs.

  • Cutting Edge Design
  • Relocatable Buildings
  • Lightweight Composite Materials
  • Fully Modular
  • Simple Attaching Hardware

The base unit measures 7’w x 8’l x 8’h and weighs approx 600 lbs, making it easy to move and effortlessly assembled by unskilled labor in 10 minutes.

Modular Composite Shelter System Offers Infinite Versatility

Sample Configuration #1

Operations Center

  • Approximately 780 sq feet and approximately 9 1/2′ ceiling height
  • Raised floor or tiered seating, allowing easy access to communication and networking
  • Ideally suited for a command and control or operations center
  • Relocatable

Sample Configuration #2

Telemedicine or Laboratory Facility

  • Approx 135 – 190 sq feet
  • Offered to address the demand for a modular, rapidly deployable medical support facility for one or several patients
  • Much larger medical treatment facilities are available as well
  • Relocatable
A power unit is connected to the electrical box.
A white box with two doors and a black handle.
A large white storage container next to a building.
A large box with two fans on top of it.
A white box sitting in the middle of a parking lot.
A bathroom with three air vents and two trash cans.
A large white box with two air conditioners and a pump.

Mobile Detention Latrine

SSU’s MCSS mobile detention latrine provides a cutting-edge design and lightweight composite materials to provide a structure that is fully mobile and easily moved via a forklift or pallet jack. This entire structure weighs approximately 1,780 lbs, making it easy to move and set up.

Base Structure Dimensions: Exterior / Interior:

  • 84″ Depth/81 1/2″ Depth; 84″ Width/81 1/2″ Width; 92″ Height/83″ Height
  • Features:
  • No tools required for assembly
  • All weather, marine grade, no maintenance required
  • Lightweight design
  • Can withstand an excess of 100 mph steady-state winds and gusts of 120 mph
  • Passed the ASTM Test Method E-84 Class II Standard 25/75 Flame Spread Test
  • Tamper-proof recessed lighting and internal floor drain
  • Panel Composition
  • 2.5″ thick panels with the structural rigidity and durability necessary to function in the most challenging environments.
  • Kevlar skin is treated with a UV inhibitor and colored pigment gel coat, providing UV protection for the life of the shelter.
  • MCSS panel composite provides strength, stiffness, and high toughness (i.e., impact, puncture, and abrasion resistance).
  • Mechanical
  • Electrical
  • Fully pre-wired according to the client’s needs
  • 60 amp electrical panel with Hub bell connectors included
  • Configurable to accept 110v or 220v power sources
  • Can accept commercial, generator, or renewable energy sources Panel Composition
  • Internal Lighting
  • Tamper-proof recessed roof panel
  • Low-power LED lighting
  • 3/4″ Lexan protective covering
  • HVAC Unit
  • Customizable to function with any HVAC system available
  • Plumbing
  • Detention grade lav-toilet combination and shower head with valve
  • Eco smart tankless water heater
  • Sanigrand Pro macerator unit

Modular Structure Detention / Holding Cell

SSU’s MCSS detention/holding cell provides a cutting edge design and lightweight composite materials with strong yet simple attaching hardware to provide a structure that is fully modular and can be moved at a later date to another location as required. This entire structure weighs approximately 600lbs, making it easy to move and assemble.

Base Structure Dimensions: Exterior / Interior:

  • 84″ Depth/77″ Depth; 84″ Width/77″ Width; 94.5″ Height/84″ Height
  • Features:
  • Fully modular, no tools required for assembly
  • All weather, marine grade, no maintenance required
  • Stacked height of disassembled panels is 20 inches
  • Lightweight panel design (each 7’ x 7’ panel weighs less than 100 pounds)
  • Can withstand excess of 100 mph steady state winds and gusts 120 mph
  • Passed the ASTM Test Method E-84 Class II standard 25/75 Flame Spread Test
  • Tamper proof recessed lighting and internal floor
  • Panel Composition
  • 3.5” thick panels with the structural rigidity and durability necessary to function in the most challenging environments.
  • Kevlar skin is treated with a UV inhibitor, colored pigment gel coat providing UV protection for the life of the shelter.
  • MCSS panel composite provides strength, stiffness, and high toughness (i.e., impact, puncture, and abrasion resistance).
  • R value of R16
  • Mechanical
  • Electrical
  • Fully pre-wired according to the client’s needs
  • 100 amp electrical panel with Hub bell connectors included
  • Configurable to accept 110v or 220v power sources
  • Can accept commercial, generator, or renewable energy sources Panel Composition
  • Internal Lighting
  • Tamper-proof recessed roof panel
  • Low-power LED lighting
  • 3/4″ Lexan protective covering
  • HVAC Unit
  • Customizable to function with any HVAC system available
  • Plumbing
White metal security room with door.